Professional concrete milling

Concrete milling is an effective way to prepare a concrete floor before applying new coatings. It eliminates irregularities, removes old layers and provides reliable adhesion to finish materials. It is used in warehouses, workshops, parking lots and other facilities with high loads

Coating comparison

Use Shift + Scroll to scroll the table horizontally

Properties of coatings	High-strength polished and polished concrete	Topping - dry hardener	Terrazzo decorative flooring	Ceramic tiles	High-performance polymer floors
Hardness	Very hard (7 on the Mohs scale)	Very hard (>6 on the Mohs scale)	Very hard (>8 on the Mohs scale)	Very hard (>6 on the Mohs scale)	Average hardness (<4 on the Mohs scale)
Impact strength	Highest abrasion resistance, not scratch resistant	High abrasion resistance	Highest abrasion resistance, not scratch resistant	High abrasion resistance	Easily scratched
Heat resistance (including frost resistance)	High	High	High	Medium	Low
Resistance to chemical reagents	High resistance to most chemicals, low resistance to acids	High resistance to most chemicals, low resistance to acids	High resistance to most chemicals, low resistance to acids	Resistance is determined by the type of grout between seams	High resistance to most chemicals, low resistance to solvents color loss
Thermocycling (in cycles)	200-400	150	600-800	200	0-100
Impact strength	Highest impact resistance	High impact strength, possible delamination of the hardened layer	Highest impact resistance	Low impact strength, high brittleness	High impact resistance, risk of coating delamination
vapor permeability	Yes	Yes	Yes	Yes	No
Water resistance	Yes	Yes	Yes	Yes	Yes
Sensitivity to capillary moisture	Not sensitive	Sensitive, shoots	Not sensitive	Sensitive	Sensitive, possible peeling, possible swelling, blistering
Can be used outdoors and in cold rooms	Recommended	Not recommended (not living at all)	Recommended	Perhaps	Not recommended
Stain resistance	Good resistance	Low resistance	Good resistance	High resistance	High resistance
Dusting	Dustless floors	May dust after abrasion of the membrane forming layer, destruction of the top layer	Dustless floors	Interstitial grout may be dusty	Dustless floors
Curing time before operation	The final coating takes about 7 days to gain strength	8-28 days (the warmer the better)	The final coating takes about 7 days to gain strength	7 days after laying	The final coating takes about 3 days to gain strength
Maintaining the original appearance	Ages 5-7	1 year	5-10 years		1 year
Durability	More than 15 years	10 years	More than 15 years	Requires repairs every 3-5 years	Lacquer renewal every 2 years
Maintenance	Easy cleaning, low maintenance costs	Renew once a year with kuring (varnish), high maintenance costs, cracking possible (depending on the substrate)	Easy cleaning, low maintenance costs	Regular repairs, high maintenance costs	Easy to clean, cannot be repaired locally, requires replacement of the entire top layer, high repair costs, cheap to maintain
Quick installation option	Yes	Yes	No (Concrete quality problems and fraction)	Yes	Yes
Quick repair capability	Yes	Yes	Yes	Full replacement (repair fails)	No
Type of surface (glossy, matte, customizable)	Customizable	Customizable	Customizable	Customizable	Customizable
Sterility	Yes	No	Yes	Yes	Yes (no seams)
Seamlessness	No	No	Customizable	No	Yes
hypoallergenicity	Yes	No	Yes	No	Yes
Fire safety	KM0	KM1	KM0	KM0	KM1-KM2
Environmental friendliness	Yes	No	Yes	Yes	Yes
Static control, intrinsic protection	Yes	Yes	Yes	Yes	No
UV resistance	Yes	Yes	Yes	Yes	Depending on the decision
Light reflectance coefficient	A good one	Bad	A good one	Bad	Bad
Odor, emission of volatile compounds	No	No	No	No	No

Additional services

Use Shift + Scroll to scroll the table horizontally

	High-strength polished and polished concrete	Topping - dry hardener	Terrazzo decorative flooring	Ceramic tiles	High-performance polymer floors
Heat resistance	Yes	No	Yes	No	Yes
Thermocycling	Yes	No	Yes	no	Yes
Can be used outdoors and in cold rooms	Yes	No	Yes	No	Yes
Quick installation option	Yes	Yes	No	Yes	Yes
Quick repair capability	Yes	No	No	Yes	No
Sterility	No, present by default	No	No, present by default	No	No
Seamlessness	No	No	Yeah, if the stomping grounds (topknot is our version of Terrazzo)	No	Yes
hypoallergenicity	Yes	No	Yes	Yes	Yes
Slipperiness	Yes	Yes	Yes	Yes	Yes
Environmental friendliness	Yes	No	Yes	No	Yes
Static control, intrinsic protection (For data centers and electronics manufacturing)	Perhaps	No	No	No	Yes
Decorating possibilities (Color, texture, filling)	Yes A colorant, but not a brightener	No	Yes Fraction, color, pattern	Yes	Yes
Ability to provide resistance to oxidizing agents, organic acids and chemical reagents	Yes	No	Yes	Yes	Yes
Possibility to ensure GOST flatness	Yes	No	Yes	No	No

Concrete milling: reliable preparation of the substrate before flooring installation

Concrete milling is one of the key steps in the preparation of the concrete surface prior to the application of new coatings. It eliminates irregularities, removes old layers, improves adhesion and provides a solid base for further construction work.

This method of processing is used for repair, reconstruction and flooring in industrial, warehouse and commercial premises. Especially in demand is milling concrete floor when preparing substrates for polymer and poured coatings, tiles, waterproofing and grinding.

Concrete floor milling has a number of important advantages:

Effective removal of old coatings, cement milk and dirt;
elimination of height differences and leveling of the surface;
improving adhesion (bonding) for new materials;
possibility of selective (localized) treatment of problem areas;
surface preparation for polymer, epoxy and concrete compositions;
Reducing the risk of coatings peeling in the future;
high productivity of works and minimum time;
application of both mechanical and chemical concrete milling - for delicate tasks.

Thanks to these properties, milling is actively used in warehouses, production facilities, car service centers, shopping centers, parking lots, logistics and retail facilities - everywhere where a durable and smooth surface is important.

Our projects

All projects

Input data for the CP

We need the following information to prepare a quote for concrete milling:

Photos and videos of the area of the work being done;
Information on the current floor covering in the work area and the need to remove it;
Approximate area of work;
Facility Address.

This data will help us provide you with the most accurate and efficient estimate of the cost and timing of the work.